Refrigerant Leak Detection & Repair

Electronic, UV, and nitrogen pressure testing to find and fix refrigerant leaks the right way.

Refrigerant Leak Detection & Repair technician at work

If your AC needs refrigerant every spring, it has a leak. Adding refrigerant without finding the leak is not a repair — it's a $400/year subscription to slowly destroying a compressor and venting ozone-depleting (or high-GWP) refrigerant into the atmosphere. The EPA actually requires leak repair on systems above 50 lbs of refrigerant, and we follow the same standard on residential systems.

What's Included With Refrigerant Leak Detection & Repair

  • Nitrogen pressure test + electronic + UV detection
  • Photo documentation of every leak location
  • EPA 608 Universal certified recovery and recharge
  • Manufacturer-spec charge weighed in — never guessed
  • All refrigerants stocked: R-410A, R-454B, R-32, R-22
  • Honest repair-vs-replace recommendation if the leak is in the coil

How Our Refrigerant Leak Detection & Repair Service Works

  1. 1

    Nitrogen Pressure Test

    System pressurized to 250–450 PSIG with dry nitrogen and held.

  2. 2

    Electronic + UV Sweep

    Calibrated detector and UV dye to pinpoint the exact leak location.

  3. 3

    Quote

    Repair options explained with photos; written flat-rate quote approved.

  4. 4

    Repair

    Component replaced or brazed, system evacuated to 500 microns.

  5. 5

    Recharge & Verify

    Charge weighed in per spec; superheat and subcool verified in operation.

Refrigerant Leak Detection & Repair FAQs

It has a leak. Refrigerant doesn't 'get used up' — if you're adding it, something is letting it out, and it should be found and repaired.